MUT III question
 

Hi!

Has anybody a practical experience with MUT III?

I would like to know if it is possible to remap EGR with that tool?

There are several different options of MUTIII available to purchase: some have CF flash card, some dont, som have many cables etc. What's minimal MUT3 configuration I would need to remap EGR for Oultander 2.2DiD 2013 (diesel)?

Thank you!

Anyone?

Well, I have to answer my own question. No, unfortunately EGR you cannot reprogram with MUT-3.
However, it is still worth to buy if you want to service your car yourself and diagnose problems, reprogram ETACS etc. Very useful tool for Outlander.

3 years warranty on my car is finished and instead of making 4th service with authorized workshop (yes, here in europe you pay for service even during the warranty), for the same amount of money I purchased MUT3 tool together with all necessary replacement parts for 4th service: engine oil, air/cabin/fuel/oil filters, brake pads, new front brake drums, oil into differential, brake fluid.

There are so many Chinese knock offs of mutt iii you have to be careful. I almost purchased ine online for $500 to then later find out by a youtube vid it was fake and just a reader and no coding.

Oh yeah, sure, one must research a little prior any purchase, some units work well and some not. But I guess, mut3 market has settled right now. With an effective return policy there are much less bad units.

this guy on youtube i found useful on identifying the differences between them