Mitsubishi Forum - Mitsubishi Enthusiast Forums

Mitsubishi Forum - Mitsubishi Enthusiast Forums (https://mitsubishiforum.com/forum/)
-   Mitsubishi Outlander (https://mitsubishiforum.com/forum/mitsubishi-outlander-10/)
-   -   Aftermarket fog lights? (https://mitsubishiforum.com/forum/mitsubishi-outlander-10/aftermarket-fog-lights-45804/)

nyislanders 01-15-2014 02:24 PM

Aftermarket fog lights?
 
Hey everyone, I have a 2007 Outlander LS without factory fog lights. I would like to add a pair of aftermarket lights to it. For anyone who may have done so already, what would be the correct diameter lights to get? And any recommendations on brand/style/whatever? Thanks in advance.

ccernst 01-15-2014 04:06 PM

I had one of the light knockout pieces get knocked out by a rock a few years back. I was going to rig up some aftermarket lights, a relay, and a fog light button from an '01-ish diamante...supposedly they fit into the switch panel below and to the left of the steering wheel. My only issue, I could never find a set of lights that included mounting hardware that would for sure mount up correctly to the three holes available on the inside of the bumper.

I ended up cutting up some dark gray plastic bins and made my own cover plates.

Not sure if these are what you'd need exactly, but check these fog light assemblies:
Land Rover Freelancer MK2 Mitsubishi Outlander Pajero L200 Fog Lights L R 05 11 | eBay
The mounting holes is what you need to look for when looking at aftermarket pieces.

Phatty McPatty 01-27-2014 10:25 PM

Hit up Daniel Stern and see what he recommends. He's extremely knowledgeable and respected in the automotive lighting and regulatory world.

SERPENTOR 02-03-2014 06:06 PM

These are the ones I have on my truck now

Phatty McPatty 02-03-2014 08:08 PM


Originally Posted by SERPENTOR (Post 299037)

Did you mount them in the vents below the fog light position? Pics?

boogunoogun 02-03-2014 09:37 PM

I wonder if these would fit. I'll have to grab the spec sheet and check one of these days when it is not snowing



Headlights - Products - J.W. Speaker Corporation


Headlights - Products - J.W. Speaker Corporation

ccernst 02-03-2014 09:57 PM

your first link does look promising. looking at the photo gallery for them, it looks like there is an up/down adjust. Supposing it does bolt up, you'll have to manually wire it up and you won't have any trim around the fog light.

boogunoogun 02-05-2014 09:33 AM

While I have not measured it yet, I think you would still have the trim ring. The trim ring is inserted in the slots around the fog light. (at least the 2012 does). It would be nice to use the same bolt holes but if not, im sure I can drill it out.

As for wiring, that is the easy part.


It is snowing like a bastard out, so one of these days I'll check

boogunoogun 02-05-2014 09:34 AM

Can anyone take their fog light out and give us some pictures / measurements?

ckmecha 02-07-2014 12:53 PM

You can buy them from Mitsubishi; MSRP $292.40/each.

I had a rock put a hole right through my 2013 with less than 1000 miles on the car. If anyone knows of a junkyard with an Outlander let me know as I would be really interested in replacing mine.

Probably not what youre looking for, but heres a pic of mine in the air dam but with the bezel removed.

https://valvesolutions.box.com/share...pllchhynxb.jpg

ccernst 02-07-2014 03:12 PM

The '07 has different mounts than that.

Ironically, I have been cleaning up my laptop to install Win8 and I found the instruction manual to install the lights part of the fog lights. I'll post a link tonight.

boogunoogun 02-07-2014 04:45 PM

1 Attachment(s)
2010-2013: Bezel 3 5/16"
Mounting holes are 4"x2". See drawing. excuse my terrible drawing skills


Attachment 2567



A JW speaker fog light would not be a direct drop in, I think you could get it to fit. Maybe for my birthday or next Christmas I pick up a set

ccernst 02-07-2014 05:49 PM

https://drive.google.com/file/d/0B1A...it?usp=sharing

joe3b 02-19-2014 05:19 PM

Anyone knows if the Pajero fog lights will fit the Outlander 2012 ? I'm planning on installing this "http://www.ebay.com.au/itm/like/160652164500?hlpht=true&ops=true&viphx=1&lpid=94"

Thanks

ckmecha 02-20-2014 11:10 AM

The light itself looks the same, with the addition of that bracket.

Ive been searching myself for a suitable replacement. I found this:

Led Fog Lights Lamps Mitsubishi L200/outlander/pajero/shogun - Buy Led Fog Lights Lamps Mitsubishi L200/outlander/pajero/shogun,Fog Lights,Led Fog Lamps Product on Alibaba.com

It looks 'right' and lists 2007 and on Outlander, as well as the Peugeot and Citroen models. Makes sense that they would use the same part in several models and years as this would have been something that quite a bit was invested in design of.

I haven't contacted the seller to see if they would sell individual units, but I did see another listing that has the Outlander but not years that looks right:

36W high power led car running fog light with cover for PEUGEOT FOCUS FIESTA RENAULT MEGANE SUZUKI CITROEN MITSUBISHI OUTLANDER -in Lights & Indicators from Automobiles & Motorcycles on Aliexpress.com

Phatty McPatty 04-03-2016 11:12 AM

Go-Parts Fog Lamp Assembly
 
1 Attachment(s)

Originally Posted by ckmecha (Post 299175)
You can buy them from Mitsubishi; MSRP $292.40/each.

A nut shattered the glass on my fog lamp assembly a few days ago so I ordered a replacement from Go-Parts.com for $122 + shipping. I've used them before and was happy with everything -- coincidentally it was also for a shattered fog lamp assembly for my old Nissan Murano.

I'll update if it doesn't fit/work.


All times are GMT -5. The time now is 08:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands