Finally silenced the seat belt reminder and other noises :)
 

Well after a long damn time of putting up with all the annoying noises this Outlander is programmed to make I finally pulled down the dash and located the source of my frustration.

Seems all the noise comes from a small speaker at the rear of the instrument cluster that is responsible for the "click click" for the indicator, the "BING! BING! BING! BING! BING! BING! BING! BING! BING!" for the seat belt reminder and the "BOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO P" for the you left your lights on business..........all noises I can do without as my brain lets me know the things I have and have not done and I choose to do them in a sequence that works for me

Attachment 5461

Attachment 5462

Attachment 5463

Covering the small hole on the back of the speaker reduces the noise output by around 80%. I tried it with some EPDM foam tape and re-installed and it was not quiet enough for me, tried a few other things and ended up filling the hole with a little bit of silicone. End result is the noise is barely audible, you can hear it if you want but most importantly you can ignore the thing if you so choose.

So get out the screw driver and return to a world of bliss.

Anyone who would like to comment things like "Why don't you just wear your seatbelt" .......please use your time more constructively by standing in front of a mirror and punching your self in the face 19 times till your hand hurts.....or better yet, afford someone else the pleasure and have them do it for you (but please post up a photo when your done)

I always wear my seatbelt, I just hate listening to 10 obnoxious "Bings!" before I get it on, and I shouldn't have to.

Now to find a way to get rid of that Nag screen on the MMCS.....note to Mitsubishi, you can EITHER tell me that using the features of a device while driving is dangerous and make me acknowledge that fact everytime I start my car OR you can prevent me from doing it......not both FFS.

Here is a short film on the relief that can be expected:

I just got these: Car Seat Belt Safety Eliminator Null Clips for Chrysler Dodge Audi BMW Chevy GMC | eBay

I pool them in when I stop at the end of the block to get the mail or in parking lots of w/e. The part that drives me insane is that of I drive with no belt and the beeper starts going off, it doesn't stop even once the car is put into park!!! It's in effing park, I'm out of the car pumping gas, I don't need my effing seatbelt on!!!

Yeah for me that just wasn't a solution at all, I want the noise to stop. I won't drive without my seatbelt on, but I will get in my car, start it while placing all the crap I was carrying in the spots it goes, select reverse and start putting the seatbelt on as I slowly reverse down my drive way.

Atleast my old car gave you 7 seconds or so or waited until you were doing over 4kph in a forward direction before beeping at you.

I love this car but they really designed it with utter idiots in mind

This nag screen needs to go too

You called yourself the Jizzer, why?

It's a nickname from my porno filming days that just stuck :D

I would call you a liar, but then again I don't want to see proof.