Mitsubishi Forum - Mitsubishi Enthusiast Forums
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

Mitsubishi Forum - Mitsubishi Enthusiast Forums (https://mitsubishiforum.com/forum/)
-   Mitsubishi Outlander (https://mitsubishiforum.com/forum/mitsubishi-outlander-10/)
-   -   New Bodyside Molding -- Installed (https://mitsubishiforum.com/forum/mitsubishi-outlander-10/new-bodyside-molding-installed-21568/)

bnilguy 08-25-2007 08:22 PM
RE: New Bodyside Molding -- Installed
 
I'm kind of looking for a set.. I've already got one door ding..and I'm thinking it could cover the ding and prevent future ones..plus they add a little interest to the sides, while still looking clean

biscuit 08-25-2007 11:34 PM
RE: New Bodyside Molding -- Installed
 
The US OEM are graphite colored, so they won't match perfectly on black. The EU OEM are available painted or unpainted, but they're all over $400.

You can mount the sportwing moldings any height you want, I just went by their recommended measurement. It matched up well with an Accord door when I tested the height for protection. They are now listed on the www.sportwing.com web site, and the photo they show has them mounted several inches higher than where I mounted mine. Dunno which location is better...


ORIGINAL: rcpax

ORIGINAL: biscuit

The red was tape used as a guide.

The painted set is $99.
Not bad. But my Outlander is already black, so I guess I can go with the OEM one for a few $ less. I think that deal is very good though for those with other colors. But I just wonder, it looks too low on the pics. I saw some pictures with OEM moldings on and it's mounted almost on the middle part of the door.

rcpax 08-26-2007 08:39 AM
RE: New Bodyside Molding -- Installed
 
Oh it's graphite? I always thought it was the regular black rubber, looking at the pics. So I have to ask the dealer again then. Yeah, I just want the black one. Yeah,you can never trust the idiot that parks beside you. Sometimes I think they do it on purpose. Getting envious of the shiny new Outlander of yours, while they drive some beaten up sedan.

bnilguy 08-26-2007 08:43 AM
RE: New Bodyside Molding -- Installed
 
The mouldings I've seen installed by the dealer were a silver..don't recall if it matched the XLS silver trim pieces or not.

rcpax 08-26-2007 08:47 AM
RE: New Bodyside Molding -- Installed
 
It could actually be ordered to the body color you want, I still have to ask. But yeah, that's interesting to know it's offered in other colors. You got me thinking there if I should get a silver one, so at least I get some contrast with a black background.

biscuit 08-26-2007 10:48 AM
RE: New Bodyside Molding -- Installed
 
US OEM are only available in one color, graphite.

biscuit 08-26-2007 10:12 PM
RE: New Bodyside Molding -- Installed
 
Photo of the graphite colored US OEM moldings on a silver Outlander.

http://www.mitsubishi-motors.com.au/...ding%20250.jpg

tufduck 10-19-2007 11:31 PM
RE: New Bodyside Molding -- Installed
 
My outtie is graphite grey. what color of molding should match? Is the $99 molding same as the OEM?

biscuit 10-20-2007 07:46 PM
RE: New Bodyside Molding -- Installed
 
You only have one choice of color for OEM, it's not an exact match for the Graphite Gray cars, but sort of close.

If you want the Sportwing molding you normally just grab the paint code from www.paintscratch.combut it looks like they don't list Graphite Gray as an option. I'd suggest getting the paint code from the door jam and email or call Sportwing.

The OEM molding is different than the Sportwing molding.

tufduck 10-20-2007 11:23 PM
RE: New Bodyside Molding -- Installed
 
biscuit, where can i find the oem one online? thanks.


All times are GMT -5. The time now is 10:19 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands