|
Wifes 2005 G-Spec Oulander Customization
10 Attachment(s)
hey guys well ithought seenas im doing a fair amount to her car il update this thread when i do stuff..
first on the list installation of RES MMCS Unit. Leather Facelift HOOD Leather Facelift Glovebox top RES MMCS unit was supplied with a sunroof model bracket and the availability of the none extinct,i was forced to weld up some tabs. screen sits bout 25mm further forward wich isnt a bad thing. and i am performing a total blackout interior(we did it on our VR4 Legnum Wagons and love it.. Totally dismantle the RES Unit completley Scrub up the plastic and apply plasti pac,then apply black in dust coats.. its a pretty strong bond and no flaking (again done on our Legnums) the roof lining and A,B,C/D pillars are getting upholstered in new black lining.. add a Euro Feel to the car with the fabric. Attachment 5849 Attachment 5850 Attachment 5851 Attachment 5852 Attachment 5853 Attachment 5854 Attachment 5855 Attachment 5856 Attachment 5857 Attachment 5858 |
Looks good. Mighty nice to be able to fab up your own brackets like that.
|
just wondering, is it difficult to strip down to the bare metal of the vehicle? I might eventually do this so I can add sound deadening material...
|
Thanx guys, yea welding is my trade so engineeringis sweet fir me lol..um tbh it is a nightmare to strip down. You'd think you can just remove abcd pillars but noooo. You have to remove front seats, remove lower abcd pillar covers then unbolt uppers then pull off then lower roof lining once removing all bits too, then getting it out without creasing it is tight too, need all the floor space you can get to turn on 45 and out.
Real nightmare |
Originally Posted by Gen-8
(Post 285785)
Thanx guys, yea welding is my trade so engineeringis sweet fir me lol..um tbh it is a nightmare to strip down. You'd think you can just remove abcd pillars but noooo. You have to remove front seats, remove lower abcd pillar covers then unbolt uppers then pull off then lower roof lining once removing all bits too, then getting it out without creasing it is tight too, need all the floor space you can get to turn on 45 and out.
Real nightmare |
here goes the project of deadening the roof :-)
|
Hehehe,you'll find a fair chunk of deadening on your lining already if you have a non sunroof model, 2 pieces roughly 800mm square
|
What were you thinking of doing? The dyna mat or just more foam style?
|
dynamat.
|
Originally Posted by firebirdrc
(Post 285818)
dynamat.
|
3 Attachment(s)
well this is some of what i did today..
good ole foam.. very light and 20mm thick should silence it alot. and fitted lights to the rear fogs,nice and bright,never knew there was a reflector in them lol Attachment 5846 Attachment 5847 Attachment 5848 |
4 Attachment(s)
and today along with stripping the front off for inspection purposes ,i noticed the Air duct is sheilded form direct ram air(scratches head),dumb!! so untili make the new AIS this will do.
fitted the New HKS Hybrid Filter (RHDJapan) and made a rectangular hole in the deflector plate for Ram Air to enter. Further more im also removing the Dampners in the Air Aystem and simplefieing it aswell. Attachment 5840 Attachment 5841 Attachment 5842 Attachment 5843 |
11 Attachment(s)
and today i layed the new roof lining i made and started assembeling the interior again.
wired,fitted the rear fog lights. installed engine bay lights for dark times and fitted some bonent struts(courtesy of Mitsubishi Legnum Boot Struts),perfect fitment.. car is comming along very well. wife misses it so gotta hurry up now Attachment 5828 Attachment 5829 Attachment 5830 Attachment 5831 Attachment 5832 Attachment 5833 Attachment 5834 Attachment 5835 Attachment 5836 Attachment 5837 Attachment 5838 |
Originally Posted by Gen-8
(Post 285931)
and today i layed the new roof lining i made and started assembeling the interior again.
wired,fitted the rear fog lights. installed engine bay lights for dark times and fitted some bonent struts(courtesy of Mitsubishi Legnum Boot Struts),perfect fitment.. car is comming along very well. wife misses it so gotta hurry up now Like all you've done for the project. The bonnet struts looks perfect and straight forward, are they OEM Legnum? we don't have Legnum in the US, so this is equal to galand's tailgate struts??? |
Are they the station wagon ? Afaik you guys do not have the ec?W/ea?W correct?
Only Europe, Asia and Australia, and New Zealand..I have hundreds of these in stock |
10 Attachment(s)
Well some more upgrades I did this week
Twin pot front brakes upgrade from PFL VR4 Legnum Rotors are the same except vr4 offers more venting. Direct bolt up etc... Attachment 5737 Attachment 5738 Attachment 5739 Attachment 5740 Attachment 5741 Attachment 5742 Attachment 5743 Attachment 5744 Attachment 5745 Attachment 5746 |
That leather dash is what I need for my outi
Where do I get that. What about leather for the seats where can I get that |
Where are you from? The leather interior I can get made anytime you want a set, the cover I can get if you own a RHD vehicle, as mine is JDM spec and most of the parts I source are for RHD cars
|
yea I am RHD
how much for the dash the same as your photo I want the leather dash like your one black and silver how much for the seat cover leather I want the front for sure i keep the back seat folded flat for work all the time but how much for the back cover in leather |
any luck yet with the brembo brake kit adapters?
|
10 Attachment(s)
here is a few more updates...
new rims im thinking of putting on the new Genuine Mitsubishi Leather interior i upholstered this week Stainless covers fitted to pillars,the mirror and rear quarter windows will be done when the parts arrive.. seat heaters fitted too bodykit should be back next week and it can all go back together.. Attachment 5724 Attachment 5725 Attachment 5726 Attachment 5727 Attachment 5728 Attachment 5729 Attachment 5730 Attachment 5731 Attachment 5732 Attachment 5733 |
4 Attachment(s)
And the doorcards inserts done along with the tweeter covers..
Not good pics as my camera is ****e!! Attachment 5720 Attachment 5721 Attachment 5722 Attachment 5723 |
Originally Posted by Gen-8
(Post 287031)
And the doorcards inserts done along with the tweeter covers..
Not good pics as my camera is ****e!! http://i1178.photobucket.com/albums/...r/DSCF5510.jpg http://i1178.photobucket.com/albums/...r/DSCF5511.jpg how's your website going now? still stuck? |
These items are NZ made not jap, my mate does the cf dipping for me, many other types too.
The leather is original brand new USDM came with Mitsi warranty certificate etc..however I have another local source to me whom can make the interior anytime and also can make the 3rd row in leather too. Website is comming along good afaik so not long.. I can't wait either trust me lol |
Il have to update this thread it seems way behind lol
|
Those leather seat covers are really Mitsubishi? The fit seems terrible. I hoped they shrunk a little and gave you a better fit.
|
Yes they are.. I fitted them myself and they have settled in nicely now thank you
|
Looking good. Keep up the excellent work.
|
3 Attachment(s)
|
8 Attachment(s)
Hey guys well here's a few more things Iv done to her car.
A lot of time spe d prepping all the individual parts . I'm doing the rear wing and bottom center insert on lower rear skirt too Attachment 5623 Attachment 5624 Attachment 5625 Attachment 5626 Attachment 5627 Attachment 5628 Attachment 5629 Attachment 5630 |
Looking good.
|
is it possible to fabricate a calipar adapter ?
|
| All times are GMT -5. The time now is 02:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands