1g throttle bodies 90-92 50 a piece

1g crank angle sensors, all working 40 a piece

stock turbo intake manifolds ported 50 a piece

1g coil pack for a 91+ 50 bucks

power transitors 20 a piece

isc sensor 30 bucks

1g head, 50k miles, race ported, 3g lifters 500

g4cs 2.4 block no crank 75 bucks

1g 6 bolt block, .20 over 2g pistons, 1g big rods, needs freshing up 50k, had 180 across when together 400 bucks

1g valve covers, hyundai smooth top and stock painted 20 a piece

1g hks vpc all sensors perfect working order 550 and 660 injector chip, changes the metering from mass air to speed density (map sensor) so no more air flow meter. 340

2g throttle body elbo drilled for air temp for vpc 50

afc 2 180

eprom ecu, socketed recapped and sealed 270

2 dsmchips stage 3 chips. Both setup for vpc on 550cc chip One chips setup for 650cc injectors, phantom knock code, studder box, octane reset aka all the stage 3 options

2nd chip is setup for 880cc injectors and vpc, all of above plus, dual timing maps. It has a extended pump gas map, so you can run high boost on pump gas, and a race gas map set for 10% leaner across the board and 23 degrees advance

80 bucks for both

to4e 60-1 with high output t4 p trim turbine wheel, setup for bolt on style to stock manifold, and wastegate off the manifold or turbine housing. I have the reciept from forced performance for the turbo rebuild,good for 630hp 3k miles asking 720

2g race ported manifold with tial 38mm wastegate flange welded on. Still has center divider as needed. 150 [/align][/align]msd dis2 asking 200[/align][/align]1g to 2g maf adaptor harness 50 bucks

punishment racing internal wastegate block off 2.5 o2 housing 60

msd dis2 with plug and play harness 200
forced performance 272/272 cams 3k miles 400

got alot of other stuff, just call and ask

call 856-264-7432[/align]