ES, OZ, LS Crossdrilled Slotted Rotors
#1
08-03-2004 | 07:29 PM
Thread Starter
|
Junior Member
Joined: Aug 2004
Posts: 22
From:
ES, OZ, LS Crossdrilled Slotted Rotors
Crossdrilled/Slotted Rotors
Hello everyone. I have 3 sets of rotors available for the 2002-2004 Lancer LS, ES, and OZ-Rally. The rotors can either be drilled, slotted, dimpled, or combination of either. The prices and dimensions of the rotors are as follow:
LS & OZ-Rally Front X-Drilled Slotted Rotor = $60.00/ per rotor
-Outside Diameter = 257mm
-Height = 45.6mm
-Bolt Pattern = 4-4 1/2
ES Front X-Drilled Slotted Rotor = $65.00/ per rotor
-Outside Diameter = 256mm
-Height = 45mm
-Bolt Pattern = 4-100
Contact: Dan
Work: 714-777-2323 x 7006
Email: steven@r1concepts.com
What about the warranty? No worries. Slam on the brakes as hard as you want. Try cracking them if possible. All rotors will have 90 days full replacement warranty. We stand behind our products and will take good care of our customers.
All R1 Concepts Rotors are certified to meet QS and ISO Quality System Standards. All rotors are manufactured to OE specifications using the same process as the factory does. Black E-Coating is applied to the rotors for a custom look and rust protection.
Below is a sample picture what the patterns on the rotors will look like. The rotors will have a black hub and the inner vents will also be black. However, the bolt pattern will look different.
Hello everyone. I have 3 sets of rotors available for the 2002-2004 Lancer LS, ES, and OZ-Rally. The rotors can either be drilled, slotted, dimpled, or combination of either. The prices and dimensions of the rotors are as follow:
LS & OZ-Rally Front X-Drilled Slotted Rotor = $60.00/ per rotor
-Outside Diameter = 257mm
-Height = 45.6mm
-Bolt Pattern = 4-4 1/2
ES Front X-Drilled Slotted Rotor = $65.00/ per rotor
-Outside Diameter = 256mm
-Height = 45mm
-Bolt Pattern = 4-100
Contact: Dan
Work: 714-777-2323 x 7006
Email: steven@r1concepts.com
What about the warranty? No worries. Slam on the brakes as hard as you want. Try cracking them if possible. All rotors will have 90 days full replacement warranty. We stand behind our products and will take good care of our customers.
All R1 Concepts Rotors are certified to meet QS and ISO Quality System Standards. All rotors are manufactured to OE specifications using the same process as the factory does. Black E-Coating is applied to the rotors for a custom look and rust protection.
Below is a sample picture what the patterns on the rotors will look like. The rotors will have a black hub and the inner vents will also be black. However, the bolt pattern will look different.
Last edited by r1concepts; 12-20-2011 at 06:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
r1concepts
Vendor Group And Special Buys
0
12-01-2004 09:41 PM
