2nd Generation This includes all Eclipses, and Talons built from 1995-1999

boost problem

Thread Tools
 
Search this Thread
 
  #1  
Old 08-15-2008, 08:27 PM
Gstfat's Avatar
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Miami
Posts: 391
Default boost problem

so heres the problem i just got my car back from the shop for the fmic i put on.my car was on about 12lbs.steady and holding,the turboxs mbc was working just fine.now heres the problem i have the boost controller fully closed and now my car in first gear does 13lbs.and in 2nd gear does about 18lbs!whats wrong?remember the mbc is completely closed,is it the actuator?
 
  #2  
Old 08-15-2008, 10:44 PM
Sebba's Avatar
Banned
Join Date: Feb 2006
Location: Austin, TX
Posts: 16,176
Default RE: boost problem

Where did you get the 16g from?
 
  #3  
Old 08-15-2008, 11:10 PM
needsagst98's Avatar
Senior Member
Join Date: Jun 2008
Location:
Posts: 269
Default RE: boost problem

do u have the turbo xs mbc with fine tune? because if u do the farther the screw is in the moree boost you get. the farther out the less boost you get
 
  #4  
Old 08-15-2008, 11:28 PM
Gstfat's Avatar
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Miami
Posts: 391
Default RE: boost problem

the turbo has been working fine,its only after the intercooler.i have the basic turboxs mbc.it cost me 85. brand new,could something be loose?or can it be the wastegate actuator?
 
  #5  
Old 08-15-2008, 11:33 PM
Sebba's Avatar
Banned
Join Date: Feb 2006
Location: Austin, TX
Posts: 16,176
Default RE: boost problem

The wastegate might not be opening right, or you might just have boost creep and never noticed it before.

Do you have the 32mm wastegate?
 
  #6  
Old 08-15-2008, 11:37 PM
Gstfat's Avatar
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Miami
Posts: 391
Default RE: boost problem

nope
 
  #7  
Old 08-15-2008, 11:40 PM
needsagst98's Avatar
Senior Member
Join Date: Jun 2008
Location:
Posts: 269
Default RE: boost problem

it could be sucking in excess air from or aournd ur mbc. are all ur ends zip tied like they should be? and did u try fully opening the mbc and see if anything at all changes?

 
  #8  
Old 08-15-2008, 11:40 PM
Sebba's Avatar
Banned
Join Date: Feb 2006
Location: Austin, TX
Posts: 16,176
Default RE: boost problem

Do you have an external or a 34mm wastegate option?
 
  #9  
Old 08-15-2008, 11:49 PM
Gstfat's Avatar
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Miami
Posts: 391
Default RE: boost problem

i have no wastegate,i have pretty much a stock setup
 
  #10  
Old 08-15-2008, 11:56 PM
Gstfat's Avatar
Senior Member
Thread Starter
Join Date: Sep 2006
Location: Miami
Posts: 391
Default RE: boost problem

just the regular stock external,the one that the 16g comes with(the rod and screw)
 


Quick Reply: boost problem



All times are GMT -5. The time now is 10:22 AM.