I have a new compressor, expansion valve and a desiccant element. I pulled the radiator but don't see a accumulator drier, so not sure where the element bag goes. looks like a tube on the drivers side of the condenser but I just can't tell. Thought this would be the easy part! Any help would be appreciated. Thanks.

 

Well I answered most of my question. There is a screw opening on the bottom of the tube on the side of the condenser. Use a 10mm hwd socket to open it and pull out the desiccant bag.My new compressor calls for 7oz of pag oil and 1oz in the accumulator drier.Since there is not a accumulator drier I am wondering if I just put the whole 8oz in the compressor, after I drain out any that may have been shipped in it. Will probably just check the parts store unless someone else knows.