I posted this in off topic as well but I wanted it to also be in the Evo section since it may help so Evo owners out if they are curious or whatever.

So here ya go





















































































[IMG]http://i33.photobucket.com

 

Very nice.

 

Wow great job and clean car. Whats the dyno results man?

 

THere are no dyno results. I am haveing a mail in flash done for it. I will dyno it later on when I get a meth kit. But on average this kit makes 410-425HP on 93 gas at 23-24PSI and make 500HP on c16 or 93+meth at like 29-30PSI

 

Hey man, how hard are cam installs? They seem to be pretty straight forward but I've never done one before. My experience has basically been: Swapped 1st gen 6 bolt into my car, turbo upgrade, intercooler install, little things, I've done the timing belt, a little experience with tuning. Clutches, suspension, etc. It's basically just checking dowel pin alignment and such right? If you want to pm me about this so I don't jack this thread that's fine.

Edit: Our avatars are somewhat similar in the stance of the cars, both black too.

 

cam install is easy after the T belt. you just hae to pull f the caps and the cam pops right out. They are on TQ'd down like 15ft lbs so they aps are easy and dont take much nut to move them

 

Ok guys first start up was a few hours ago. Got the car to run took it for a few low boost pulls. The car has no exhaust on it because I need a weld but at 14PSI the car moves. It is prob faster than the stock turbo at 22PSI easy. Wait till I turn that thing up to a good 23 now. BTW the open wastegate is really really loud.

Dont worry we got the vids to prove it just need keith to post em up.

 

that is so sick i wish i had all that money to drop on an evo man i need to get into that business

 

become a cable guy lol. that is what I do