2007 Outlander Aux Cable add-on
Thread Starter
|
Junior Member
Joined: Mar 2013
Posts: 1
2007 Outlander Aux Cable add-on
I bought a mit3.5 aux cable
http://www.discountcarstereo.com/pdf/mit-3.5m.pdf
but my stereo doesn't have a 14pin or a 22pin it has 20.
So i emailed the manufacturer and they told me that the red wire is for the right channel. White wire is for Left channel and Black wire is for ground. I then checked online for the stereo wire diagram and found left front,right front,left rear,right rear etc. I want to tie these into the current wires in the stereo but don't know which ones to put the red and white ones.
http://www.installer.com/pdf/99-7013.pdf
http://www.discountcarstereo.com/pdf/mit-3.5m.pdf
but my stereo doesn't have a 14pin or a 22pin it has 20.
So i emailed the manufacturer and they told me that the red wire is for the right channel. White wire is for Left channel and Black wire is for ground. I then checked online for the stereo wire diagram and found left front,right front,left rear,right rear etc. I want to tie these into the current wires in the stereo but don't know which ones to put the red and white ones.
http://www.installer.com/pdf/99-7013.pdf
Senior Member
Joined: Nov 2009
Posts: 626
From: Vancouver, Canada
That diagram is wrong. See this page, look at the AUX in points for C-14/C-15:
Second Generation Outlander Stereo Wiring - Mitsubishi Wiki
Second Generation Outlander Stereo Wiring - Mitsubishi Wiki
Thread
Thread Starter
Forum
Replies
Last Post
mhc1990
Mitsubishi Outlander
20
Jan 30, 2021 12:00 PM
wolfie8
Mitsubishi Outlander
1
Nov 2, 2009 11:14 AM
07, 2007, aux, cable, cord, instructions, manufacturers, mitibishi, mitsubishi, outlander, putting, stereo, unused, upgrade, wheres
