New Bodyside Molding -- Installed
#1
![Default](/forum/images/icons/icon1.gif)
I've been looking for some door protection for my 07 Outlander for a while. The Euro Mitsubishi bodyside molding is nice, but would cost about $400 without paint.
So I did some research and found out that www.Sportwing.com now makes a kit for the 07 Outlander, even though it's not listed on their site yet. It comes pre-painted, just give them the paintcode from www.paintscratch.com and they match the color. I ordered mine on Sunday and it arrived on Friday. The color match is perfect and the shape fits nicely.
The kit is 4 pieces, cut at the correct angle for between the doors. They use 3M tape and provide 2 alcohol wipes, 2 Pro-Bond adhesive promotor bottles, and an instruction sheet that goes through the process and gives measurements. They call for 8 1/4" up from the black lower sill in front, and 9 1/4" in back. I found that to be a little low so I went 8 1/2 and 9 1/2.
The installation was quick and easy, it took me about 20 minutes max. Here are some photos:
![](https://mitsubishiforum.com/upfiles/11453/asppg_Ms989186192.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Ja123998367.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Bx248969942.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Cl247946626.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Qh363637650.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Fw888674271.jpg)
So I did some research and found out that www.Sportwing.com now makes a kit for the 07 Outlander, even though it's not listed on their site yet. It comes pre-painted, just give them the paintcode from www.paintscratch.com and they match the color. I ordered mine on Sunday and it arrived on Friday. The color match is perfect and the shape fits nicely.
The kit is 4 pieces, cut at the correct angle for between the doors. They use 3M tape and provide 2 alcohol wipes, 2 Pro-Bond adhesive promotor bottles, and an instruction sheet that goes through the process and gives measurements. They call for 8 1/4" up from the black lower sill in front, and 9 1/4" in back. I found that to be a little low so I went 8 1/2 and 9 1/2.
The installation was quick and easy, it took me about 20 minutes max. Here are some photos:
![](https://mitsubishiforum.com/upfiles/11453/asppg_Ms989186192.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Ja123998367.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Bx248969942.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Cl247946626.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Qh363637650.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Fw888674271.jpg)
![](https://mitsubishiforum.com/upfiles/11453/asppg_Mv590665132.jpg)
#10
![Default](/forum/images/icons/icon1.gif)
ORIGINAL: biscuit
The red was tape used as a guide.
The painted set is $99.
The red was tape used as a guide.
The painted set is $99.