OEM foglight install
#1
OEM foglight install
ok I got a set of OEM fogs thath I just put in my LS yesterday. after following directions, I thought I did a very good install (took something like 3 hours just cause I wanyed to be sure).
start the car turn on head lights, and the moment of truth.
nothing. [:@]
I took off the bumper again, re checked the wires.
nothing.
Today I had my friend test out the wires. he tells me that theres no power going into the sockets. but I told him there should be, because I just put in the fresh relay.
I also put in new bulbs today, just in case.
Im going to the dealer on monday, but I know there has to be a simple and logical explanation. man this sux, i was saving up money for the intake, but its gotta go to the dealer to get lights working
start the car turn on head lights, and the moment of truth.
nothing. [:@]
I took off the bumper again, re checked the wires.
nothing.
Today I had my friend test out the wires. he tells me that theres no power going into the sockets. but I told him there should be, because I just put in the fresh relay.
I also put in new bulbs today, just in case.
Im going to the dealer on monday, but I know there has to be a simple and logical explanation. man this sux, i was saving up money for the intake, but its gotta go to the dealer to get lights working
#5
RE: OEM foglight install
its the factory switch, all of it was factory...
I went to the dealer, supposedly the switch is faulty and I got my cabin filter changed.
filter = $45
new switch = $45
labor = 90
punisher = -$180 [:'(][:@]
I went to the dealer, supposedly the switch is faulty and I got my cabin filter changed.
filter = $45
new switch = $45
labor = 90
punisher = -$180 [:'(][:@]