Hello, im new here with my L200 K75T
#2
There is a lot of work to do, i think i have been double crossed at the car dealer
For everything is a first.
Anyway,
1. the floor at at both sides at the wheel housing is rotten through, needs cut out and weld in new plate material.
2. the front radiator support panel is rusted through, needs cut out and weld in a new panel.
3. taking of the back platform which has holes in the wheelhousing as well, needs welding.
4. take away as much as rust possible.
5. the front suspension needs an overhaul with new bushings.
6. The axle needs new nuts and a new bearing.
7. new bushing back suspension.
future:
The engine is using a lot of oil, so that might be bad piston rings in combination with old valve seals.
Any suggestions, please let me know.
Hope you can help me out if i need some advice on this forum.
Best wishes,
Tomas o/
For everything is a first.
Anyway,
1. the floor at at both sides at the wheel housing is rotten through, needs cut out and weld in new plate material.
2. the front radiator support panel is rusted through, needs cut out and weld in a new panel.
3. taking of the back platform which has holes in the wheelhousing as well, needs welding.
4. take away as much as rust possible.
5. the front suspension needs an overhaul with new bushings.
6. The axle needs new nuts and a new bearing.
7. new bushing back suspension.
future:
The engine is using a lot of oil, so that might be bad piston rings in combination with old valve seals.
Any suggestions, please let me know.
Hope you can help me out if i need some advice on this forum.
Best wishes,
Tomas o/
Thread
Thread Starter
Forum
Replies
Last Post