New Members Area Just Joined? Be sure to pop in here and introduce yourself.

nooob with potential

Thread Tools
 
Search this Thread
 
  #1  
Old 01-31-2008, 06:09 AM
epia225's Avatar
Thread Starter
Join Date: Jan 2008
Posts: 6
Default nooob with potential

forum's great [sm=smiley20.gif][sm=smiley20.gif][sm=smiley20.gif]

well,
im 19.
bought my very fisrt car.
i have a 97 eclipse gs 5 speed
130,xxx miles clean title
they were asking $3,000
worked out a deal and got it for $2,500
everything is good drives good...
except for the throw out bearing (i think its the T.O. bearing) cause when it makes that noise when i start it but when i hold the clutch down all the way it stops and when i rev it again then let go of the clutch a bit i can hear it again also when i turn for a U turn and i turn the wheel all they way to left/right it makes a noise like something is rubbing makes that styrofoam noise.. + i need to get it smogged

i have a few questions: [ul][*]would it pass smog without having to fix the throw out bearing?[*]what would happen if i dont get that fix?[*]and if i do get it fix how much are we looking at?[*]what kind of coverage should i get for the insurance? [/ul]


btw heres a pic. (i will show more pics soon)
 
  #2  
Old 01-31-2008, 11:47 AM
TheEngineer's Avatar
Super Moderator
Join Date: Jan 2006
Location:
Posts: 11,758
Default RE: nooob with potential

The TOB has nothing to do with smog. It has to do with the clutch. Turning all the way to the left or right wouldnt cause a sound from the TOB either. That would have to do with either the drivetrain or the power steering.
 
  #3  
Old 01-31-2008, 12:57 PM
epia225's Avatar
Thread Starter
Join Date: Jan 2008
Posts: 6
Default RE: nooob with potential

thank you...much help apreciate it
this answers so much to my questions
the tob is not making the noise when i turn the wheel
im assuming it is what u where saying the drivetrain

do you know how much the average they would charge me to replace my tob @ the shops?
or would it be easier if i do it?

oh and the drivetrain would it also be easier if i did it?
 
  #4  
Old 01-31-2008, 02:11 PM
Dusty Eclipse's Avatar
Senior Member
Join Date: Feb 2007
Location: 34669
Posts: 4,445
Default RE: nooob with potential

Are u sure the turn thing isnt due to a CV or something? THey could be unrelated.
 
  #5  
Old 01-31-2008, 03:12 PM
epia225's Avatar
Thread Starter
Join Date: Jan 2008
Posts: 6
Default RE: nooob with potential

ORIGINAL: Dusty Eclipse

Are u sure the turn thing isnt due to a CV or something? THey could be unrelated.
CV?
im not sure...
all i know is when i turn the wheel all the way to the left/right
it makes a disturbing noise
 
  #6  
Old 01-31-2008, 04:31 PM
TheEngineer's Avatar
Super Moderator
Join Date: Jan 2006
Location:
Posts: 11,758
Default RE: nooob with potential

i think they are unrelated. Something that happens when the clutch is in or out, and something that happens when turning are unrelated. I wouldnt worry about the TOB for right now. But the sounds when turning is a problem. I dont think it would be a CV joint because usually that only will happen turning either one way or the other. Not both ways. Can you hear which side its comming from

Also when i say drivetrain. I dont mean like one part. I mean like something in that system, like the CV joint, ball joint, wheel bearing, axle, steering column, ect.
 
  #7  
Old 01-31-2008, 05:41 PM
Join Date: Jan 2008
Location:
Posts: 301
Default RE: nooob with potential

Well i have a squeeking noise when i turn my wheel, took it to midas. they told me it was my lower control arm and ball joint. Check to make sure the noise isint coming from around your front suspension. Could just be a minor problem that can develop into a major one if you take care of it soon.
 
  #8  
Old 01-31-2008, 10:46 PM
epia225's Avatar
Thread Starter
Join Date: Jan 2008
Posts: 6
Default RE: nooob with potential

thanks a lot that could be it
the ball joint
i think im going to take it to a shop
do u know how much it will cost me to get it fixed?
 
  #9  
Old 01-31-2008, 10:56 PM
Join Date: Jan 2008
Location:
Posts: 301
Default RE: nooob with potential

Well, im not sure about the eclipse's. But on my talon you cant just buy the ball joint. You have to get the control arm + the joint. = $90.00 max and taking it to a shop shouldnt take no more than an hr to install.I wouldnt pay no more than $200.00, thats with them supplying the part and the install
 
  #10  
Old 01-31-2008, 11:18 PM
epia225's Avatar
Thread Starter
Join Date: Jan 2008
Posts: 6
Default RE: nooob with potential

thanks
i also called this shop to see the estimate to fix the throw out bearing
they said the throw out bearing is not expensive but the labor will cost me $700-$1200
 


Quick Reply: nooob with potential



All times are GMT -5. The time now is 10:49 AM.