Nitrous, Super Chargers, & Turbos All charged talk about going, and going FAST!

Turbo/BOV?

Old Jan 20, 2007 | 02:06 AM
  #1  
Natedogg89's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2006
Posts: 552
From:
Default Turbo/BOV?

On turbo eclipses if you vent to the atmosphere what modifications do you need to do to the mafs so the car runs normal again and not rich.97 GST
 
Old Jan 20, 2007 | 03:31 AM
  #2  
silvercoupe97's Avatar
Senior Member
Joined: Nov 2006
Posts: 3,430
From: Colorado Springs, CO.
Default RE: Turbo/BOV?

You need to get a GM MAF and a translator for the 2Gs. At that point you can remove your stock MAF and run just a straight pipe and you can vent trouble free.
 
Old Jan 20, 2007 | 10:43 AM
  #3  
EMonz57's Avatar
Senior Member
Joined: May 2005
Posts: 12,084
Default RE: Turbo/BOV?

Or a standalone
 
Old Jan 21, 2007 | 12:46 AM
  #4  
Natedogg89's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2006
Posts: 552
From:
Default RE: Turbo/BOV?

Whatever is the cheapest but yet decent. I just bought a 97 GST so yeah first dsm. I was just wondering. How much would the GM MAF and translators cost? Its not bad for the engine/turbo to vent right?
 
Old Jan 21, 2007 | 04:41 AM
  #5  
silvercoupe97's Avatar
Senior Member
Joined: Nov 2006
Posts: 3,430
From: Colorado Springs, CO.
Default RE: Turbo/BOV?

ORIGINAL: Natedogg89

Whatever is the cheapest but yet decent. I just bought a 97 GST so yeah first dsm. I was just wondering. How much would the GM MAF and translators cost? Its not bad for the engine/turbo to vent right?
That combo will run you around $300 and it makes it alright to vent the bov without running rich. Without it, your car may idle bad and you'll run rich when you shift. These motors were designed to run recirculated and it's one of those things that do more bad than good if vented. Using a GM MAF+T will help if you really want to VTA. It's one of those "is it worth it?" mods. My bov is pretty loud being recirc'd. I also have hard piping and an aftermarket filter.
Oh yeah, a stand alone starts at ~$1100.
 
Old Jan 21, 2007 | 12:30 PM
  #6  
Natedogg89's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2006
Posts: 552
From:
Default RE: Turbo/BOV?

ORIGINAL: silvercoupe97

ORIGINAL: Natedogg89

Whatever is the cheapest but yet decent. I just bought a 97 GST so yeah first dsm. I was just wondering. How much would the GM MAF and translators cost? Its not bad for the engine/turbo to vent right?
That combo will run you around $300 and it makes it alright to vent the bov without running rich. Without it, your car may idle bad and you'll run rich when you shift. These motors were designed to run recirculated and it's one of those things that do more bad than good if vented. Using a GM MAF+T will help if you really want to VTA. It's one of those "is it worth it?" mods. My bov is pretty loud being recirc'd. I also have hard piping and an aftermarket filter.
Oh yeah, a stand alone starts at ~$1100.
Yeah i thought about it more and i think ill just stick with recirculating. And go with a Greddy Type RS, that can recirculate right as it comes correct?
 
Old Jan 21, 2007 | 12:44 PM
  #7  
TheEngineer's Avatar
Super Moderator
Joined: Jan 2006
Posts: 11,758
From:
Default RE: Turbo/BOV?

there are alot of different BOV's that can recirculate. So i would do some searching and make sure you get a bov that you are gonna like the sound of. Cuz personally i dont like the greddy
 
Old Jan 21, 2007 | 10:16 PM
  #8  
Natedogg89's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2006
Posts: 552
From:
Default RE: Turbo/BOV?

ORIGINAL: TheEngineer

there are alot of different BOV's that can recirculate. So i would do some searching and make sure you get a bov that you are gonna like the sound of. Cuz personally i dont like the greddy
really. I only knew of the HKS and GREDDY. What else is there that sounds good?
 
Old Jan 22, 2007 | 01:11 AM
  #9  
EMonz57's Avatar
Senior Member
Joined: May 2005
Posts: 12,084
Default RE: Turbo/BOV?

HKS FTW.

There is stock upgrades like the JDM MR DV holds almost 30 pounds
 
Old Jan 22, 2007 | 01:23 AM
  #10  
silvercoupe97's Avatar
Senior Member
Joined: Nov 2006
Posts: 3,430
From: Colorado Springs, CO.
Default RE: Turbo/BOV?

Forge 1G BOV
I like mine.
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:37 AM.