When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I pulled my headliner yesterday due to sagging material. It looks like there are two layers of foam on the substrate.
Can someone confirm the substrate/headliner board is actually very thin material?
It looks like it's about 1/32" thick if I'm right. I would hate to remove a layer of structural foam which is providing shape and form to the substrate.
Photo below is with some of the foam removed showing the substrate board.
Would appreciate some feedback, Thanks
Last edited by revenson; Oct 18, 2024 at 01:09 PM.
Advice on Headliner Restoration
