All prices are slightly negotiable. Prices are for local pickups which are more than welcome. Shipping is paid for by the buyer and calculated upon request. Parts are located in San Diego, but I drive up to Orange County over the weekend about every other week. All stock parts are off a Tarmac Black 2006 Evo GSR. Trades and things I'm looking for are at the end of this thread.

AFTERMARKET:

2x Bazooka CSW1204 12" Subs in 1cf Box :: $80 each
150 RMS each. Each box was custom-made with 3/4" solid wood and carpeting felt was used to match the trunk carpeting. Quick disconnect for the sub wires is built-in into the box.

Cusco Front & Rear Carbon Fiber Strut Bars :: $280 for both OR $150 for front and $170 for rear.
http://www.mamut.com/homepages/Norwa...u_carbon40.jpg
http://images.cjb.net/2522f.jpg
http://images.cjb.net/494f0.jpg
4cm in diamater. 1x1 rear carbon fiber weave. Looks great and very functional. Add the Cusco V-Brace for the reat strut and cut down on chassis flex even more! Cost me $210 each at Gruppe-S.com. Selling because looking to upgrade to an APR or Carbing strut bar and I've outgrown the CF craze.

Coolingmist Low-Level Sensor :: $15
Costs $20 on coolingmist.com. Never been used. Selling because I purchased a meth tank that bad one pre-tapped.

Gurney Flap :: $30
http://images.cjb.net/a8142.jpg
http://images.cjb.net/f7a08.jpg
Have ONLY one in Rally Red currently. I recently stumbled across a distributer who sells these. If there's interest, I can get more in Black, White, Red, and possibly other colors. Has a special uv clearcoat to protect it from the sun. Includes pre-applied 3M sticky. Fitment is just as good as the factory gurney flap, but at more than half the price.

Polished Resonated Test Pipe :: $40
http://images.cjb.net/ebdf6.jpg
http://images.cjb.net/140af.jpg
Barely used. Was originally used as a test pipe, but decided to go straight test pipe without a resonator. Have a local shop weld on flanges and it will fit up perfect with any aftermarket system at a fraction of the cost of those $150 test pipes.

Pre-Cut Window Tint :: $30
5% limo tint for the rear windows and windshield. A+ quality tint. I have it on my personal car for the past couple months and it's been working out great so far with no discoloration.

STOCK:

Air Box :: $80
2000 miles on it. Includes entire baffle with upper hood scoop, intake box, and filter.

Battery Tray :: $10
Relocated my battery to the trunk.

Exhaust Manifold Heat Shield :: $30
Thermalcoated and painted the stock manifold so I decided to run without the heat shield.

Exhaust System :: $120
2000 miles on the parts. Includes downpipe, midpipe, catalytic converter, and muffler-back wth stock polished exhaust tip.

Front Strut bar :: $50
I've accumulated too many strut bars -_-

Head Unit :: $40
http://images.cjb.net/a1f34.jpg
http://images.cjb.net/ffb3b.jpg
I am now officially radio-less! I knew I should have just went with an RS to begin with. This is for the RS guys who miss their tunes. All the wires are there already. Plug 'n play. Also have the stock speakers below.

Leather Shift **** :: $30
Metal **** came with the short shifter.

Roof Antenna :: $10
http://images.cjb.net/7ab94.jpg
Went with a short antenna.

Shifter w/ Retainer Clip :: $40
http://images.cjb.net/25769.jpg
Went with a short shifter. Retainer clip alone is worth $16.

Side Power Mirrors :: $80
http://images.cjb.net/ceddb.jpg
http://images.cjb.net/b8223.jpg
I have APR side mirrors. Great for someone who wants the Evo RS look.

Speakers (Front & Rear) :: $50
http://images.cjb.net/4c3cf.jpg
http://images.cjb.net/78fde.jpg
Includes four identical front and rear speakers and front tweeters from the a-pillars. Perfect for the RS owner who wants their tunes in a plug 'n play system. Check out the stock radio also available above.

WANT TO BUY/TRADE:

* 2x Front Strut Center Bolts
* 10" or 12" Sub - Quality one that can push close to 700W RMS or two subs that push close to 350W RMS each.
* GT Spec Rear Trunk Cage
* Carbon Fiber Hood & Trunk - Open to make and type. Prefer to trade for my stock Tarmac Black hood and trunk. Also need a trunk with no wing holes unless they are drilled for the wing below.
* GT Wing - One from APR or other companies like C-West.
* Nisei Lower Intercooler Pipe
* Upper Intercooler Piping - Looking for HKS UICP with SSQV bov, but open to other offers. Has to fit with stock battery.
* Front Lower Arm Brace - Looking for Tanabe specifically, but open to offers.
* Rear Sway Bar End Links - Specifically the Agency Power brand although might consider Perrin as well.
* Rear Control Arms - I think Agency Power only makes these.
* Ingalls "Stiffy" Torque Dampener
* Aftermarket Motor Mounts
* 5-pt Harness - Need one for the passenger seat. 3" belt and camlock preferred.
* 2x Anti-Subarmine Belt - Twin harness type.
* Intake Hard Pipe - Will be used with a Buschur Racing intake filter, but any old hard pipe will do.
* HKS DLI2 Ignition Amplifier - Also Sun Auto or XS Engineering wil be considered.