ok so i got a 95 gst it has a ported intake/exhaust manifoldand o2 housing. i have a big 16g a safc2 and a set of 280 crower cams 550cc injectors and a 3inch exhaust with no cats mufflers or resonators is it possible to hit the 300whp mark with tuning and the boost upped? imma get a new fuel pump soon and i would like to get this on the stock sidemount ic if thats possible.. dou you guys think it can happen? oh and the engine is bein rebuilt as we speak so its new and i got the balance shafts taken out to

 

Geta FMIC and fuel pumpand youll be able to get 300. Take about 22psi and a tune

 

youll definetly needa FMIC

 

Will he be able to do that w/ 550cc injectors? Where do they max out at, j/w?

 

Evos stock injectors are 550s. and people get well over 300 on them

 

ok well i gt a frontmount on order i just wanted to see wat could be made on a a side mount

 

True I forgot abt that.

 

i'm not sure if those bc 280 cams are the best for your setup. those are really agressive cams and wouldn't do much for you because they are meant for like gt40's and such and don't really start breathing in more air until you hit like 4400rpm's, but are fine up until the 10k mark, you'd be better off with like the 272 cams

 

well im planin to switch to a bastard 20g so i fugured the cams would work ok with that but it will be awhile before that turbo even gets bought so imma max the 16g first