Help! Alternator Belt
#2
![Default](/forum/images/icons/icon1.gif)
ight. 420a motor
standing in front of car
on the alternator there are 2 bolts. one on the back (fiewall side) and one on the left (radiator fluid resirve side). loosen those up and wrap it around it and the balencer.
standing in front of car
on the alternator there are 2 bolts. one on the back (fiewall side) and one on the left (radiator fluid resirve side). loosen those up and wrap it around it and the balencer.
#3
![Default](/forum/images/icons/icon1.gif)
Oh crap, sorry, I should've been more clear. I have a 97 GST, so I would need a 4g63 walkthrough. I was able to find a few leads as to what to do, but I don't feel 100% sure as to what I have to loosen up, which is supposedly the tensioner.
A picture of my belt
![](http://a.imagehost.org/0013/SP_A0053.jpg)
And the picture for what I think i'm supposed to loosen up. These two bolts are ridiculously hard to get to, especially bolt 2 since its on an angle, and my ratchet is too thick to get to bolt 1.
![](http://a.imagehost.org/0013/SP_A0054_1.jpg)
I hope I'm not doing anything wrong, and thanks in advance :P
A picture of my belt
![](http://a.imagehost.org/0013/SP_A0053.jpg)
And the picture for what I think i'm supposed to loosen up. These two bolts are ridiculously hard to get to, especially bolt 2 since its on an angle, and my ratchet is too thick to get to bolt 1.
![](http://a.imagehost.org/0013/SP_A0054_1.jpg)
I hope I'm not doing anything wrong, and thanks in advance :P
Thread
Thread Starter
Forum
Replies
Last Post
bedjemp
Mitsubishi Montero & Montero Sport
3
05-19-2005 02:02 PM