vacume hose?
#1
vacume hose?
alright i have a question...I have a 97 gst and for those of you that have one...you know the hose the runs from the valve cover to the intake? Well i keep on getting oil sucked down into the intake from that hose. Is it possible to cap the intake hole off and put a breather filter on the valve cover hole to eliminate this oil problem? Will it create any problems?
#3
RE: vacume hose?
You're talking about the PCV hose right?? When was the last time you changed your PCV valve? It should be done every 20-30K miles OR once a year. if that valve is bad you could blow the vlave cover gasket or it may be the culprit for your current dilema. The part will cost less than $10 (Installed even at most shops LOL). It might be worth checking out.
#7
RE: vacume hose?
If you do a catch can make sure that you do put a breather on one of the holes of the catch can. I hooked a greddy up to mine when I first got the car per the instructions and for a while I couldent under stand why the car was leaking so much oil.