3rd Generation This includes all Eclipses built from 2000-2005

Looking for some advise

Thread Tools
 
Search this Thread
 
  #1  
Old 06-16-2007, 12:00 PM
Twizted3g's Avatar
Thread Starter
Join Date: Jun 2007
Location:
Posts: 66
Default Looking for some advise

Well heres what im looking at i have a bone stock 2001 V6 GT. I want to keep it naturally asperated! Im just looking for something i can do that will give me some decent power gains. I was thinking of throwing a ram air intake on it. Eventually I might throw an exhaust on there but i think it sounds pretty good as it is so i dont want to do anything insane. Im just looking for some advise of some performance mods. And yes i do all my own work on my cars even welding exhausts so im not an idiot, im just lost with this car cause there is so much stuff out there and i know none of it cause ive owned a focus for the past 2 years so im kinda out of the import loop!
 
  #2  
Old 06-16-2007, 02:12 PM
Join Date: Sep 2006
Location:
Posts: 681
Default RE: Looking for some advise

first off ur bettern than me. i learn i as i go along but ive heard some good mods would be
injen cai
evo headers
i would go forthe tanabe concept g exhaust. some peeps tell me its quiet for the most part
all i can help u wit since im still leanin too.
 
  #3  
Old 06-16-2007, 02:29 PM
Join Date: Mar 2007
Location:
Posts: 245
Default RE: Looking for some advise

Here's my thoughts on it. And don't listen to ba3kgt, an evo head swap is not possible (4 banger heads on a V6..."nuff said") Injen CAI because it's a long tube *long tube gets colder air from under the car than a ram air which sucks up the hotter air from around the engine. However, the Injen CAI can be made either short ram or Long tube because it's seperated into 2 tubes that are connected by rubber hosing. I suggest a nice Cat back Possibly Greddy Evo 2, with a High Flow cat and Headers, A lightened Flywheel, Performance cam gears, fuel system upgrade (fuel injectors, fuel pump, fuel regulator,) stage 2 clutch possibly, performance pistons, bored out block, port and pollish exhaust, performance connecting rods, and I'm not sure as of right now if there are any other mods, that's all I can think of as of right now.
 
  #4  
Old 06-16-2007, 02:31 PM
Join Date: Sep 2006
Location:
Posts: 681
Default RE: Looking for some advise

i lied my bad didnt read the V6 part
 
  #5  
Old 06-16-2007, 02:47 PM
Twizted3g's Avatar
Thread Starter
Join Date: Jun 2007
Location:
Posts: 66
Default RE: Looking for some advise

lol its ok! It is an Auto so no tranny upgrades. : ( but oh well its a commuter car so im not looking for ALOT of mods. I want to stick with something that sounds like the stock exhaust just a little louder and maybe alittle deeper sounding. Im going to go check out the Greddy evo exhaust now. i know they sound awsome on a 350z but thats a completely different set up.
 
  #6  
Old 06-16-2007, 02:57 PM
Twizted3g's Avatar
Thread Starter
Join Date: Jun 2007
Location:
Posts: 66
Default RE: Looking for some advise

http://videos.streetfire.net/search/...0616b33819.htm

basically that sound! Im actually looking into that exhaust right this moment
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
provenprogram
Mitsubishi Diamante
0
01-28-2011 10:05 AM
joseph_medley
2nd Generation
13
12-01-2006 07:29 PM
Xavier
Mitsubishi 3000GT
6
07-10-2006 01:47 PM
1998gst
2nd Generation
1
09-21-2005 04:59 PM



Quick Reply: Looking for some advise



All times are GMT -5. The time now is 05:45 AM.