What oil to use? ticking sound
Thread Starter
|
Junior Member
Joined: Oct 2013
Posts: 1
From: Christchurch, New Zealand
What oil to use? ticking sound
Hi,
New to owning a Mitsubishi, and having trouble finding information.
1) What oil should i be using in a 1997 3.0L 6G72 Diamante?
-I have just done an oil change (Castrol mineral 15W-40 & Ryco Z411 filter), and now noticing the hydraulic lifters after starting when cold. Should i use a thinner-grade oil (i.e. 10W-40)?
2) Since doing the oil change, i can hear a light 'tap tap tap' sound about once every revolution. It fades in and out when idling, and goes away when i rev the engine above 1500rpm.
- I hear this could either be the lash adjusters/hydraulic lifters, or something to do with the timing belt idlers. Is this right? Any ideas?
Appreciate any help,
Nick
New to owning a Mitsubishi, and having trouble finding information.
1) What oil should i be using in a 1997 3.0L 6G72 Diamante?
-I have just done an oil change (Castrol mineral 15W-40 & Ryco Z411 filter), and now noticing the hydraulic lifters after starting when cold. Should i use a thinner-grade oil (i.e. 10W-40)?
2) Since doing the oil change, i can hear a light 'tap tap tap' sound about once every revolution. It fades in and out when idling, and goes away when i rev the engine above 1500rpm.
- I hear this could either be the lash adjusters/hydraulic lifters, or something to do with the timing belt idlers. Is this right? Any ideas?
Appreciate any help,
Nick
Junior Member
Joined: Jun 2015
Posts: 4
From: Greensboro
Ok, I'm new to this Mitsubishi Forum. I have been using Mobile 1 0W-30 or winter, and 0W-40 for summer. 15W-40 sounds a bit thick. I have used Lucas Oil Stabilizer with good results, but I have not put any in my 6G72. Not yet, anyway. Ya, I know, this is almost 2 years old. Sorry.
Thread
Thread Starter
Forum
Replies
Last Post
way2fast
Mitsubishi Outlander
8
Dec 22, 2013 08:54 AM