Mitsubishi Outlander The new crossover from Mitsubishi, mixing the usefulness of an SUV with the size and convenience of a sport wagon.

outlander 06 hard to start

Thread Tools
 
Search this Thread
 
  #1  
Old 11-14-2015, 08:40 PM
outlander06's Avatar
Junior Member
Thread Starter
Join Date: Feb 2015
Location: gatineau qc, Canada
Posts: 14
Default outlander 06 hard to start

my outlander 06 is hard to start after refuelling.and when it does it idles up and down.have a check engine light on.try to refuell with motor running but when i remove the gas cap it stalled.
Im baffle...
 
  #2  
Old 11-15-2015, 09:21 AM
Guyfromhe's Avatar
Senior Member
Join Date: Nov 2013
Location: Winnipeg, mb
Posts: 565
Default

Does it run/start perfectly when you start it except for when you refueled?

Can you get the check engine code scanned and post the code?
 
  #3  
Old 11-16-2015, 08:29 AM
outlander06's Avatar
Junior Member
Thread Starter
Join Date: Feb 2015
Location: gatineau qc, Canada
Posts: 14
Default

yes it runs perfectly otherwise .will get it scan and post the code later. Thanks
 
  #4  
Old 11-17-2015, 09:35 AM
jimmyrinse's Avatar
Member
Join Date: Feb 2015
Posts: 34
Default

Originally Posted by outlander06
my outlander 06 is hard to start after refuelling.and when it does it idles up and down.have a check engine light on.try to refuell with motor running but when i remove the gas cap it stalled.
Im baffle...
Is it only after refuelling or if you leave it and do a cold start do you have the same problem?
 
  #5  
Old 11-18-2015, 04:24 PM
outlander06's Avatar
Junior Member
Thread Starter
Join Date: Feb 2015
Location: gatineau qc, Canada
Posts: 14
Default

only after refuelling. got a code #0171 that said vaccuum leak
 
  #6  
Old 11-18-2015, 10:10 PM
Guyfromhe's Avatar
Senior Member
Join Date: Nov 2013
Location: Winnipeg, mb
Posts: 565
Default

I wonder if your gas cap isn't sealing properly... Are you making sure you put it on tightly? Can you smell gas at all when it's closed?
 
  #7  
Old 11-19-2015, 04:13 AM
jimmyrinse's Avatar
Member
Join Date: Feb 2015
Posts: 34
Default

Originally Posted by outlander06
only after refuelling. got a code #0171 that said vaccuum leak
Do you have the same problem then if you just take the fuel cap off when it's stood and simply put it back on then try and start?
 
  #8  
Old 11-19-2015, 09:13 AM
outlander06's Avatar
Junior Member
Thread Starter
Join Date: Feb 2015
Location: gatineau qc, Canada
Posts: 14
Default

the gas cap is always tight,no smell of gas.
to jimmyrinse did not try that but i will and post my answer later .thanks
 
  #9  
Old 11-20-2015, 12:48 PM
outlander06's Avatar
Junior Member
Thread Starter
Join Date: Feb 2015
Location: gatineau qc, Canada
Posts: 14
Default

did remove the gas cap and install it again and it started fine but then when i stopped at the end of the driveway it stalled and was turning awile before it started again.
 
  #10  
Old 11-20-2015, 06:28 PM
Guyfromhe's Avatar
Senior Member
Join Date: Nov 2013
Location: Winnipeg, mb
Posts: 565
Default

Could have something to do with the evap system...
 


Quick Reply: outlander 06 hard to start



All times are GMT -5. The time now is 12:22 AM.