I have a 2011 outlander GT. The dealership installed a remote start in my car. Well, when they put the plastic panel under the steering wheel back on, they forgot to hook up the ACS off switch and the HID leveling switch.

You can access these by just poping off the little storage bin.

So I have 3 connectors, blue, grey, and white. All the same style. Can someone pop that little tray out and tell me which go where? Or just take a picture and post it?


Thanks

 

Take it back to the dumb $hit dealer and have him do it.

 

those idiots will probably waste 2 hours of my time. I will if I have to. I was just hoping someone here could help since it would not take someone long to pull the cover off, take a pic/ tell me which connector goes where

 

Well i'm at the dealership. Wasting so far 35+ minutes for 2 damn connectors. These people suck!!!

 

So, after an hour, they said I was all set. I walk out to my car. turns out they broke the plastic that the switch is held in by. How could I tell? the rotary switch was half way pushed in. So I complained and got that taken care of. Jesus what a day

Anyway, in case this happens to anyone else, Here is a picture of the set up



or read below

Rotary HID switch (switch is green) Gets the GREY connector

ASC off switch (switch is black) gets the WHITE connector

Then they just put the blue connector to the blank plate next to the ASC off switch

 

And these dealers wonder why they get a bad reputation.

So far, the dealer who I bought mine from has been good. Had it in to have the BT module installed and they did a good professional job. Will find out more when I have gotten some more miles on it.