here is the link ~~~~~~~~~~> https://mitsubishiforum.com/m_95911/tm.htm <~~~~~~~~~~~~

is this the head i need ?

i see a few on ebay to with cams i think i will get one from ebay that has the cams

oh and whats way is the DIY way ?? sorry not good with the lingo yet:P


DIY = do it yourself ?

 

yup DIY=do it yourself. Too bad you wernt around alittle while ago, i had i head that i just sold for 250. and that included everything. PM 93eclipsegsx on here. I know he has an extra head lying around. Im not sure if you can use the 1g head though. The only thing im wonding here, and i havnt read any of the writups so im not sure, but can you bolt a 4g63 AWD tranny to a 4g64?

 

There are pages of info on this swap. It's a really long read and you gotta push past the BS, but a good read nonetheless.


*wrong link, lol. Let me find it again.

Zod posted the write up for this swap.
http://www.extremeevolutions.com/4G64_buildup.htm
63 tranny works just fine, you'll need that tranny for the transfer case.

 

well i am going to start with just the motor, i get payed not this thursday but next am i will go on a hunt for a head then two weeks after that cam's then pistons then rods then the turbo itself .. how must bost can i go and how much HP will i have ?

 

The motor can knowingly handle 400hp in stock form. Some 4g63 motors are freaks of nature and maybe able to handle more, that's up to you to find out, lol.
HP is only limited on the build, turbo size, fuel, air, and management. Those will be up to you

Here's the actual link that I was looking for. I had a few opened up and I think I grabbed the wrong one, but here's the one.
http://www.dsmtalk.com/forums/showth...light=2.4+swap

 

keep us up do date on this and maybe some pics. Sounds like its gonna be a very interesting project to follow

 

so i need a 2G head ?

 

i still want to do this but i dont know what all i need ?
do i need the intake wiring harness exc....
should i just buy a 2.0 turbo compleat motor and pull my motor out and drop in the 2.0 i buy and if i do go that way will it bolt to my tranmission?
i just wanna drop a few bucks pull out my motor drop the newone in a few days , this possible ?