EGR block off!
#1
EGR block off!
well when i got my new intake all of the hses and stuff that were conected to the stock air box are all just hanging there now, i have nothing goint to my header from the airboxany more, so how do i do an EGR block off ?
#5
RE: EGR block off!
Yup, a block off plate and plugs for the hg nipples on the TB and the mid sized one that goes to the intake pipe. I might suggest a gasket for the blockoff plate too, I had a tiny leak from my blockoff plate and I used an old piece of tin to sub as a gasket...it's still working btw. Even an old or new, lol, soda can will work (assuming you do know that I mean to cut it to shape).
Might I suggest FFWD Connection.
They have a copper plate for just this reason
I have an aluminum one btw , hence my suggestion.
Hey VR4GARY, bud660r has an Eclipse...I'm just saying
Although this middle one looks like ours.
Might I suggest FFWD Connection.
They have a copper plate for just this reason
The copper alloy will embed with the mating surfaces and insure a tight seal...better than a stainless or aluminum plate.
Hey VR4GARY, bud660r has an Eclipse...I'm just saying
Although this middle one looks like ours.
#6
RE: EGR block off!
thanks alot for the clear answer silvercoupe!
it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!
it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!
#7
RE: EGR block off!
ORIGINAL: bud660r
thanks alot for the clear answer silvercoupe!
it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!
thanks alot for the clear answer silvercoupe!
it just a plate right nothing special about it? if so i could just make one out of alum "i work at a machine shop" we have alot of aluminum layin around!