2nd Generation This includes all Eclipses, and Talons built from 1995-1999

idle help

Old Feb 16, 2009 | 02:30 PM
  #1  
byrdman4185's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2009
Posts: 17
Default idle help

i have a 96 eclipse gst and a week ago the car started bouncing at idle from 500 to 1800and then threw a check engine light. the code says in in the idle control system like that really helps so i have been trouble shooting all the sensors in the entire system and have come up with no sensors being bad. any ideas of what i might have over looked???????
 
Old Feb 16, 2009 | 04:14 PM
  #2  
estraw's Avatar
Senior Member
Joined: Dec 2005
Posts: 2,465
From:
Default RE: idle help

sounds like your idle air controller valve is on the fritz. whats the code number? (P_ _ _ _)
 
Old Feb 16, 2009 | 04:20 PM
  #3  
needsagst98's Avatar
Senior Member
Joined: Jun 2008
Posts: 269
From:
Default RE: idle help

its proabbly a p0505 code. idle air controller. my98 gst has the same problem. get a new motor and u wil be fine. i tested mine and it said it worked but it really didnt. get a new one and ur idle will be good as ong as everything else is correct.
 
Old Feb 16, 2009 | 05:58 PM
  #4  
byrdman4185's Avatar
Thread Starter
|
Junior Member
Joined: Feb 2009
Posts: 17
Default RE: idle help

already replaced that and the tps. anything els it could be?
 
Old Feb 16, 2009 | 07:10 PM
  #5  
97casper's Avatar
Joined: Dec 2008
Posts: 13
From:
Default RE: idle help

I have a 97 spyder GS and had the same thing happen to it for three months. took it to the auto shop they checked the plug pins at the iac motor strightened one and set the base line idle and its been fine ever sence.
 
Old Feb 16, 2009 | 07:17 PM
  #6  
dsm1990gsx's Avatar
Super Moderator
Joined: Oct 2007
Posts: 4,682
From: Pa
Default RE: idle help

Check for vacuum leaks.
 
Old Feb 17, 2009 | 12:34 AM
  #7  
2slow's Avatar
Senior Member
Joined: Jan 2007
Posts: 104
From: akron ,ohio
Default RE: idle help

see i have a nice thing called mitchell on demand so if you got a diagnostic trouble code (dtc) i can look it up and find out what tests you need to run to find out which component that is malfunctioning so if you can get it do it and save your self 65$ per hour
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LeoGS
New Members Area
4
Nov 6, 2020 06:12 AM
96eclipsedohc
2nd Generation
5
Feb 8, 2007 09:20 PM
yamahablaster8230
2nd Generation
2
Aug 29, 2006 09:28 AM
sreps
2nd Generation
8
Jan 21, 2005 08:55 PM
eclipse_rider
2nd Generation
1
Oct 27, 2003 05:46 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:04 PM.