2013 Lancer LX - Factory Stereo/Reversing Camera Wiring
#1
2013 Lancer LX - Factory Stereo/Reversing Camera Wiring
Hi Guys,
I am trying to help out a friend who has a 2013 LX Lancer with factory reversing camera and has the DY-5MW3R69-T-6 factory unit currently.
I am trying to work out the wiring for the factory reversing camera as his is replacing the factory 7" touch screen unit with a better aftermarket model, but wants to retain the factory reversing camera.
I have tried searching and cannot find any definitive results, so any help would be appreciated.
Here are some pic links from pictures i've taken:
Top of factory stereo/head unit
Rear of factory stereo/head unit
Factory wiring harness for stereo/head unit
The connections which are used on the factory unit, are the 2 white plugs and the smaller grey plug.
The additional brown/coffee coloured plug i'm holding is not being used at the moment and usually sits up by the blue strap in the picture.
From what i can gather, the grey plug is for the reversing camera and other 2 are for power, steering wheel controls and speaker outputs (amongst others).
Wondering if someone could give me both a pin out of all 3 connections and also assisting in how to took up the reversing camera, needing reverse sensing, RCA out and such, i can redo some wiring if required for this.
Thanks.
I am trying to help out a friend who has a 2013 LX Lancer with factory reversing camera and has the DY-5MW3R69-T-6 factory unit currently.
I am trying to work out the wiring for the factory reversing camera as his is replacing the factory 7" touch screen unit with a better aftermarket model, but wants to retain the factory reversing camera.
I have tried searching and cannot find any definitive results, so any help would be appreciated.
Here are some pic links from pictures i've taken:
Top of factory stereo/head unit
Rear of factory stereo/head unit
Factory wiring harness for stereo/head unit
The connections which are used on the factory unit, are the 2 white plugs and the smaller grey plug.
The additional brown/coffee coloured plug i'm holding is not being used at the moment and usually sits up by the blue strap in the picture.
From what i can gather, the grey plug is for the reversing camera and other 2 are for power, steering wheel controls and speaker outputs (amongst others).
Wondering if someone could give me both a pin out of all 3 connections and also assisting in how to took up the reversing camera, needing reverse sensing, RCA out and such, i can redo some wiring if required for this.
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
djorgio
Mitsubishi Outlander
72
12-18-2020 03:21 AM