timing
Thread Starter
|
Junior Member
Joined: Apr 2013
Posts: 10
From: L.A. California
timing
2000 gallant. Broke timing belt. I replaced it & car will not ttart. Took it off turned engine 180, still no start. It sounds as if it had no spark. Checked plugs/coils OK.. Any thoughts?
Senior Member
Joined: Jun 2013
Posts: 1,219
From: Northland, NZL
uhhh....
Tdc #1.
Line up your cams.
Belt on.
Check compression.
If you broke it while running, id expect a fair bit of damage.
If it has a dizzy, and no spark, id expect you sheared the drive pinion key.
Tdc #1.
Line up your cams.
Belt on.
Check compression.
If you broke it while running, id expect a fair bit of damage.
If it has a dizzy, and no spark, id expect you sheared the drive pinion key.
Thread Starter
|
Junior Member
Joined: Apr 2013
Posts: 10
From: L.A. California
All pulleys on mark, yes
Sounds like no compression, lady said it always sounded that way.
Broke while d, yes. I'll check drive pinion key-compression. Thanx
Thread Starter
|
Junior Member
Joined: Apr 2013
Posts: 10
From: L.A. California
Ooh, yes there is spark, dizzy?
