Finally decided to get rid of useless parking lines as well as annoying "Check surroundings for safety"

Now it looks nice and clean:


Still going to try making a custom parking lines specific to the camera I have (lens angle, position etc). Not in -18C feels like -30C though

 

woow, how is it done?

 

By changing 2 files on MMCS HDD, \ScreenData\AV\imagefiles\3H45X_DEFAULT.gif and \ScreenData\AV\GS_AV_STRING.tbl

 

I need to do this in order to connect a GPS in reverse mode screen. Those lines are blank, or have a specific value??

 

First one is a GIF image, I've changed it wiping the lines off.
Another one contains most language-depending text resources, I've changed it replacing that message with line of spaces.
Please note that non-mirror image which is generally supplied by a dashcam is totally unacceptable for a rear view.

 

do you need to unlock the hard drive to do that?

 

Correct.

 

thanks for sharing the information, and you're right about the mirror image of the reverse mode, is something to consider in my project

 

I got a cheapie camera on eBay that looks exactly like the OEM one.
(Sony CCD so the image is good) It has it's own virtual line guidance lines that match it's lens.. I have never noticed if it's a mirror image or not.

I decided I didn't want to go to all the trouble of running a cable (I did this once in my last car and did not enjoy it) so I grabbed a digital 2.4ghz wireless TX/RX set and hooked that up to the backup lights a long with the camera and I managed to tuck everything inside the hatch...

I have an aftermarket display/stereo so I just plugged the receiver in to the supplied video and power connectors.

Anyway it's almost perfect and it's been a big help when backing up and it was an easy install..

 

Could you please share a link?