ETACS options customization
#362
Just read through the whole thread. If I change the diameter of the tire size, will this fix the speedometer output also? I have an ASX with the stock 215/60/17. If I change it to something like 225/60/18 I will get a speed difference around 1.48x the original speed. If I alter the tire diameter in the ETAC to the new size will this correct the speedometer? I really want to fill up the wheel well with the speed discrepancy in the speedo. Not sure if the speedo is fly by wire now. Thanks
Last edited by Big_d_lou; 07-19-2012 at 01:17 PM. Reason: Auto correction ........ Sucks......
#363
Just a little heads up on tire diameter throwing off speedo, if you can calculate the difference you can remove the speedo, open face, and re position needle to required difference.. Ie if it's 10mph out,and your doing 60, drop needle back 10mph so it'll be doing 50. Just a thought, I did it in my outlander. , the speedometer is not spring loaded like the old ones, it's motor driven without a mechanical return stop, it's all electrical now
#365
OK guys, I confirm DiagBox 6.19 working with no code requests for all 3 sections (vehicle, defaults, customer).
You need to delete lines containing
<Door Name="TLCD_ASSISTANCE_CODE" Number="4"/>
from C:\AWRoot\dtrd\comm\XMLTLCD\*.xml
I remind Out Sport/RVR/ASX owners than your vehicles are now in Diagbox as a Peugeot 4008 (Outlander is 4007). Though you can still manage your vehicles through selection of 4007/C-crosser, some ECUs (electric steering, push button start etc) will be shown only for 4008.
You need to delete lines containing
<Door Name="TLCD_ASSISTANCE_CODE" Number="4"/>
from C:\AWRoot\dtrd\comm\XMLTLCD\*.xml
I remind Out Sport/RVR/ASX owners than your vehicles are now in Diagbox as a Peugeot 4008 (Outlander is 4007). Though you can still manage your vehicles through selection of 4007/C-crosser, some ECUs (electric steering, push button start etc) will be shown only for 4008.
Last edited by Vadimus; 07-31-2012 at 05:17 PM.
#368
OK guys, I confirm DiagBox 6.19 working with no code requests for all 3 sections (vehicle, defaults, customer).
You need to delete lines containing
<Door Name="TLCD_ASSISTANCE_CODE" Number="4"/>
from C:\AWRoot\dtrd\comm\XMLTLCD\I3_I4_COMBINE.xml
I remind Out Sport/RVR/ASX owners than your vehicles are now in Diagbox as a Peugeot 4008 (Outlander is 4007). Though you can still manage your vehicles through selection of 4007/C-crosser, some ECUs (electric steering, push button start etc) will be shown only for 4008.
You need to delete lines containing
<Door Name="TLCD_ASSISTANCE_CODE" Number="4"/>
from C:\AWRoot\dtrd\comm\XMLTLCD\I3_I4_COMBINE.xml
I remind Out Sport/RVR/ASX owners than your vehicles are now in Diagbox as a Peugeot 4008 (Outlander is 4007). Though you can still manage your vehicles through selection of 4007/C-crosser, some ECUs (electric steering, push button start etc) will be shown only for 4008.
I will test it in the next days.
Regards
#370
If this works in your Out, I have hope that can work on the mine. . .