ETACS options customization
#461
09-10-2012, 09:24 AM
Hi,
This is exactly what happened to me. Accidently downloaded the 4007 profile onto my ASX, i am still trying to find the way out.
To disable the 4WD, you need to go to 4007-> BSI manual configuration-> select the setting to 2WD / Front wheel only.
There are 2 setting need to be changed (i think is the 'Final drive' and 'transfer').
This is exactly what happened to me. Accidently downloaded the 4007 profile onto my ASX, i am still trying to find the way out.
To disable the 4WD, you need to go to 4007-> BSI manual configuration-> select the setting to 2WD / Front wheel only.
There are 2 setting need to be changed (i think is the 'Final drive' and 'transfer').
well now ive discovered more issues.
4wd lock service light is now flashing...i dont have 4wd
the door unlock when touching the handle does not work anymore.
the horn beep when activating and deactivating alarm does not work anymore.
ive tried to repair the issues via diagbox with no luck. ive tried using peugeot 4007 and 4008 with no luck in repairing. Is there another vehicle profile i can try to use to fix it?
My next option is to remove diagbox and install lexia and pp2000.
my car is a 09 lancer gts
4wd lock service light is now flashing...i dont have 4wd
the door unlock when touching the handle does not work anymore.
the horn beep when activating and deactivating alarm does not work anymore.
ive tried to repair the issues via diagbox with no luck. ive tried using peugeot 4007 and 4008 with no luck in repairing. Is there another vehicle profile i can try to use to fix it?
My next option is to remove diagbox and install lexia and pp2000.
my car is a 09 lancer gts
#463
09-10-2012, 01:49 PM
The only way out is to get a similar car, get in the configuration and take screenshot of all the default. Then reproduce the configuration on the "broken" one. I know, the same thing happen to me on an evo and I was able to 100% recover using this method.
that stupid apply default configuration option #$%#@$. They should at least log what have change or add an option to save it before...
Mart
that stupid apply default configuration option #$%#@$. They should at least log what have change or add an option to save it before...
Mart
Last edited by Mart; 09-10-2012 at 02:23 PM.
#464
09-10-2012, 03:15 PM
Big_d_lou,
Thank you. I will try to check to see if this is possible (I am still trying to understand the functionality of Diagbox). If this can be done, then it will be a great help.
Anyway, I also noticed that diagbox do not have all the access to the ECU like the MUT III. Here are the ASX default setting base on engine type:
CODING LIST
Thank you. I will try to check to see if this is possible (I am still trying to understand the functionality of Diagbox). If this can be done, then it will be a great help.
Anyway, I also noticed that diagbox do not have all the access to the ECU like the MUT III. Here are the ASX default setting base on engine type:
CODING LIST
#465
09-10-2012, 07:45 PM
The only way out is to get a similar car, get in the configuration and take screenshot of all the default. Then reproduce the configuration on the "broken" one. I know, the same thing happen to me on an evo and I was able to 100% recover using this method.
that stupid apply default configuration option #$%#@$. They should at least log what have change or add an option to save it before...
Mart
that stupid apply default configuration option #$%#@$. They should at least log what have change or add an option to save it before...
Mart
If someone would be so kind as to sending me a screenshot of the default configuration of a 09 Lancer GTS
#466
09-11-2012, 07:00 AM
Hi Big_d_lou,
What is your ASX configuration? Mine is:
Engine: 4B11 2.0, Petrol
Transmission: CVT 6 speed
Drive: 2WD With ABS, ASC and Hill start assist.
Safety: Driver, knee and front passenger airbag only
Without xenon lamp, no sunroof, without MMCS.
If the configuration are same or similar, appreciate you can share the diagbox setting with me.
What is your ASX configuration? Mine is:
Engine: 4B11 2.0, Petrol
Transmission: CVT 6 speed
Drive: 2WD With ABS, ASC and Hill start assist.
Safety: Driver, knee and front passenger airbag only
Without xenon lamp, no sunroof, without MMCS.
If the configuration are same or similar, appreciate you can share the diagbox setting with me.
#467
09-11-2012, 07:29 AM
Hi,
from where I can get the default for other model such as EVO, lancer etc? Would be very helpful in case of a problem...
thanx you
Mart
found some:
http://sportback.2de.ru/00/html/M100101500052800ENG.htm
http://outlander.2de.ru/00/html/M100101500020500ENG.HTM
from where I can get the default for other model such as EVO, lancer etc? Would be very helpful in case of a problem...
thanx you
Mart
found some:
http://sportback.2de.ru/00/html/M100101500052800ENG.htm
http://outlander.2de.ru/00/html/M100101500020500ENG.HTM
Big_d_lou,
Thank you. I will try to check to see if this is possible (I am still trying to understand the functionality of Diagbox). If this can be done, then it will be a great help.
Anyway, I also noticed that diagbox do not have all the access to the ECU like the MUT III. Here are the ASX default setting base on engine type:
CODING LIST
Thank you. I will try to check to see if this is possible (I am still trying to understand the functionality of Diagbox). If this can be done, then it will be a great help.
Anyway, I also noticed that diagbox do not have all the access to the ECU like the MUT III. Here are the ASX default setting base on engine type:
CODING LIST
Last edited by Mart; 09-11-2012 at 08:14 AM.
#469
09-11-2012, 10:52 AM
Asx 2.0 petrol 4b11 cvt 2wd abs no hill assist or acs. 2 air bags only driver and passenger. I'll grab my setting tomorrow. I left my laptop in the office lol. Have tried reading the fault codes of the car? I had some fault code that I cleared. Then service light went away.
#470
09-11-2012, 11:12 AM
Thanks. Yes, got fault code but cannot clear. fault code:
C1290
U1417
P1773
C1290
U1417
P1773
Asx 2.0 petrol 4b11 cvt 2wd abs no hill assist or acs. 2 air bags only driver and passenger. I'll grab my setting tomorrow. I left my laptop in the office lol. Have tried reading the fault codes of the car? I had some fault code that I cleared. Then service light went away.