ETACS options customization
#521
No check for updates, no authentication. Just press Cancel.
#523
What am I missing???
I upgraded to V06.22 in DiagBox. I cannot locate where to change the settings for:
1. TPMS
2. auto lock/unlock of doors
3. independent fog lamp actuation
4. speed warning alert
I do have communication and have changed my rear wiper intermittent timing from 8 sec to 16 so I know I do have the capability.
Has anyone successfully changed these options on a 2012 Outlander 4cy ES before?
Can anyone provide the tree to arrive at these functions on the menu?
Thanks.
1. TPMS
2. auto lock/unlock of doors
3. independent fog lamp actuation
4. speed warning alert
I do have communication and have changed my rear wiper intermittent timing from 8 sec to 16 so I know I do have the capability.
Has anyone successfully changed these options on a 2012 Outlander 4cy ES before?
Can anyone provide the tree to arrive at these functions on the menu?
Thanks.
#524
One Question
Hi TrailBrake,
How did you make out in changing your TPMS?
Is that setting behind the "Programming by Default" button? Can you confirm that clicking on that button will bring you to the menu to change additional settings? I may have misread on this forum but doesn't that reset all the values for the vehicle to factory defaults?????
I want to proceed cautiously and appreciate your input (or anyone else's).
Thanks !
How did you make out in changing your TPMS?
Is that setting behind the "Programming by Default" button? Can you confirm that clicking on that button will bring you to the menu to change additional settings? I may have misread on this forum but doesn't that reset all the values for the vehicle to factory defaults?????
I want to proceed cautiously and appreciate your input (or anyone else's).
Thanks !
#525
#526
...pending
Thanks TrailBrake !
I will await your response. Judging by Vadimus' screen shot on 11/05/2012 it appears that is the case but wanted to be sure. Maybe we should wait for a response from somebody who successfully changed it. I just fear of making my 2012 Outie and my wife's 2010 Outie a 'vegetable' by unintentionally loading all factory default settings.
I will await your response. Judging by Vadimus' screen shot on 11/05/2012 it appears that is the case but wanted to be sure. Maybe we should wait for a response from somebody who successfully changed it. I just fear of making my 2012 Outie and my wife's 2010 Outie a 'vegetable' by unintentionally loading all factory default settings.
#527
Agreed.
I will be proceeding carefully, and will stop if I get to a point were I don't feel comfortable. If nothing else, I can trace the steps to get to that menu.
I will be proceeding carefully, and will stop if I get to a point were I don't feel comfortable. If nothing else, I can trace the steps to get to that menu.
Last edited by TrailBrake; 11-08-2012 at 01:22 PM.
#528
Here are my steps so far. Items I selected are highlighted in blue.
Start Diagbox program
Peugeot
4007
Validate VIN (Check mark)
Diagbox
Repair
Global Test runs
Built-in System interface (BSI)
ETACS_SUV? screen
Configuration
Manual Configuration
Switch on Ignition' screen
Check mark
Vehicle Configuration
Programming By Default
Screen says:
There are two ways to configure list of default parameters:
Do you want to configure the default parameters automatically?
X
Under inflation detection
Missing
===
I did not want to go any further until those steps were validated.
Start Diagbox program
Peugeot
4007
Validate VIN (Check mark)
Diagbox
Repair
Global Test runs
Built-in System interface (BSI)
ETACS_SUV? screen
Configuration
Manual Configuration
Switch on Ignition' screen
Check mark
Vehicle Configuration
Programming By Default
Screen says:
There are two ways to configure list of default parameters:
Do you want to configure the default parameters automatically?
X
Under inflation detection
Missing
===
I did not want to go any further until those steps were validated.
Last edited by TrailBrake; 11-12-2012 at 06:43 PM.
#529
> Programming By Default
'There are two ways to configure list of default parameters:
Do you want to configure the default parameters automatically?'
'There are two ways to configure list of default parameters:
Do you want to configure the default parameters automatically?'
Last edited by Vadimus; 11-09-2012 at 08:38 PM.