Sorry for dropping off for a day or two. Weekend got in the way.

Anyway, you were dead on accurate. The speakers now work, in fact everything works perfectly except for the bluetooth microphone on the unit. (She successfully paired her phone and can hear people call in through the radio perfectly. But they can't hear her except through the speaker on her phone so it sounds like she's 50 feet away in a tunnel.)

I was about ready to chalk that up to simply being a bad microphone, but you just mentioned a mic plug. What is that? Never heard of it or saw that in the wiring.

Thanks again for all your help. Getting the radio working was 90% of the battle!

 

Weekends with kids! I go to work Monday for a break!

Glad speakers are working, anything to keep them from texting while driving!

There should be a regular mic input on the back (pink end in pic), or you can probably use the aux input if there's one in the front. But your deck should have included a Bluetooth mic with wire. They have a regular headphone jack end. I've attached the pic from my old one. You could buy a seperate bluetooth mic easily online for the aux input.

 

LOL, there's plenty of weekends I feel like that. Thankfully this past one wasn't one of those!

I don't see that pink mic wire, or anything similar on the back of my unit:



I'm guessing it's because it's supposed to have a working microphone built into the front?



There should be no wire required to get that front mic up and functional, should there?

 

I would think there actually should be. If you can plug a set of ear/head phones in there, you'll need a Bluetooth mic.

Like the one in the pic I put up ealier, or maybe your daughter's cell ph came with headphones and a mic built in, they all used to. Either way, id bet something 3.5mm goes in there. Sorry, I'm not much of a Bluetooth user myself.

 

HI guys,

I am having no sound problem. My car is outlander 2007 with Rockford Fosgate amp. I'm plugging the Android head unit in but no matter how I connect the amp wire or ant wire of head unit to the ctsmt002.2 interface (from connects2) I still have no sound.

Any one has experience on this can share?


Thank you so much!!!

 

hi, I have the same problem. Did you find a solution?

 

My problem was that the blue wire needed to be connected to the blue wire on my Pioneer to activate the amplifier. I also picked network mode, it should be standard mode.