I have a 97 ecplipse RS 2.0 auto. The ignition coil has been change and i am not getting any power to it.The Cel light dosent light up either when i turn the key on acc so i changed the ECU from a 98 ecplipse rs.Same issue no cel light lights up on acc and no spark to the ignition coil anyone have this issue before? TIA

 

check the distributor

 

the rs models dont have a distributor they run off a coil pack.I checked the crank angle sensor cam sensor and all are not getting power.All the relays checked out also

 

oh yea your right....well if the sensors arnt getting power then something must not be plugged in or a fuse

 

I know its gonna sound retarded, but maybe the battery? When I recieved my 10mm spark plug wires, I did a plug and wire change, and when I turned it over the day before it was fine, and after doin the plugs and wires, it wouldnt turn. I thought the plugs were bad, but it was just the battery. Longshot, but itd be nice if it was an easy fix like that.

 

It's the CAS, by the way.