Great thread !!! A bit long to read but so much instructive !!!

Maybe this technical bulletin will be useful to someone.
It explain the

ACCESSORY REMOTE ENGINE START
Programming the KOS System for those models

2009−2011 Endeavor

2010−2012 Eclipse/Eclipse Spyder

2009.5−2012 Galant

2009−2011 Lancer

2010−2011 Lancer Sportback

2009−2012 Outlander

2011−2012 Outlander Sport

link to file: http://mmc-autoelectric.org.ua/downl...tsb1166001.pdf

Have fun

 

I have been using diagbox 5.29 for a while now with no problems, i thought id upgrade to a newer version. so i uninstalled 5.29 and reinstalled 6.26 and went to use it and cannot access to change the parameters through lexia or diagbox using c-crosser like i have been with 5.29. Diagbox connects to my lancer successfully, it detects the serial number. I just cant figure out how to get into the same spot to change parameters like TPMS settings, headlight settings, etc etc.

any help would be greatly appreciated.

Thanks

 

how much to send it to ny, usa?

 

Please vadimus, I'm very interested in this question too.
Would you explain again it?.

I'm seek the exact parameter in Diagbox, but I am confused,
Trailer turn detection, Head lamp washer... I don't know...

A lot of thanks in advance, from Spain. ;-)

trasplas

 

Hi guys

I live in Asia and bought the Lexia PP2000 cable thingy from ebay USA. The package arrived but now I cant install any software that came with it. I really wanna play around with the ETACS since my Lancer is now lack of many options that may be enabled via software.

So the software still strictly applicable to Win XP?

 

Diagbox 7 works with win7 without any problems.

 

hi everyone,

- finally able to install diagbox successfully (at least i think so) on my xp laptop
- upgraded to 6.22 thru diagbox app
- applied TLCD fix (i just double clicked the exe, dos window pops up, and it listed a bunch of files as "deleted")


then...
went outside to my car...

- restarted diagbox
- connected lexia to laptop and then to obd in car
- turn car on, not all the way to ignition
- message pops up saying app is unable to communicate with the vehicle card, retry or cancel

if i just keep pressing cancel i will still be able to advance to the next screen UNTIL the actual config area. i had to punch in my VIN, it didn't detect automatically as i had hoped


could one of these be my problem?
a. faulty hardware
b. incorrect firmware (im not sure if it is 4.2.4)
c. incorrect installation / connection sequence
d. is there a "connect" button i have to press first
e. other


THANK YOU IN ADVANCE FOR ANY HELP
= )

 

No VIN means no connectivity. Downgrade to 4.2.2 as a first step.

 

have a look at this forum:

Reverse engineering d'un clone de l'interface XS evolution pour reflash n° de série - Page 9

There is a patch for using firmware 4.3.0 with clone device ...

 

I strongly dislike things like their admin wrote:
I guess I lost some money sharing all I know while bringing Lexia to Mitsubishi drivers of North America and beyond but even now I think it was worth it.

To summarize - no, there's no way for us to alter our Actia Evo XS clones to make it work with 4.3.X firmware.