I'm looking for tools to unpack/pack loading.kwi files too.
I know, they exist but it's almost impossible to find.
All I found is:
UnpackFS.exe
http://rapidshare.com/files/386752610/UnpackFS.exe.html
MD5: FA5C5675ABC7147FAF2F9A22A1B3490F
Unpack_kwi.exe
http://rapidshare.com/files/38675464...k_kwi.exe.html
MD5: D118A95073DE13FF4C4E23CBC1384D33
Parameter is the filename of the kwi datafile ( usually Loading.kwi ) for unpacking where option is p (pack) or u (unpack)

They doesn't work properly or I can't right use them
I'm sure some russian guys can unpack/pack files, I've seen nice piece of work them with russian version MMCS
http://www.out-club.ru

Otaku has unpacker too, he wrote nice software with GUI LoadingView which is unpacking loading.kwi but unfortunatly edit/save options are disabed there

I have also KWIEdit but is always crashing when I try to open loading.kwi files

I'm particularly interesting EU version of 50.21 with DVD in Motion allowed

And what happened with AUX in Motion allowed ?
Is it impossible to crack ?

 

Yea, can you send me 50.21 Russian patched? Can you patch the US version of 50.21?

 

In the Russian version, Russian default and can not be changed.

 

You guys have going on so far! I can't wait to go home and read more of this thread. I currently have a 30.94. Version 2009 mmcs.

I recently installed it into a 2010 outlander which does now does not allow connection to the bluetooth module, (the new fuse bluetooth module)

I wanted to ask if in any of the new versions of OSs from the mmcs if you saw any hardware identifiers that showed a difference between the 10 and the 09 mmcss.

My concept I wanted to approach you with was if I was able to clone a hd if the new fware could then be copied over into my older mmcs to get functionality from the bluetooth module.


Thoughts? And thank you in advance for sharin your knowledge on here.

 

Have someone tried to replace the standard HDD with an SSD?
And one question for the guys that owns one of the new MMCS, are they still using the IDE (PATA) interface in the unit?

 

Yep! I just bought a new 2010 Outlander with Nav and it's a IDE drive.

 

Hello everyone.

I bought Outlander (2007) not long ago, but I bought it from Japan. I wonder if the procedure in 1st post will help me as well. Everything on the screen in Japanese and if something will go wrong I probably won't be able to fix it or ask for advice here as I don't know Japanese.

Has somebody tried it on Japanese Outlander?
Is there a chance to patch menues from Japanese to English?

Thanks in advance.

 

CAN ANYONE PLEASE HELP ME !!!
I am trying to unlock my HD.I have followed the instructions on page 1 to the letter.
MMCS HD connected as primary master (no other HD connected)
Boot linux with locking/unlocking utilities
Wait for root@xbox-HDM:/1 prompt
type unlockhd p B2BAB3BCB0DFACBEB1BBBEDFB1ADD2CDC9CEBAB2DFB19E8996 DFAA8C9A8DDFDF

Then i get message

bsh:unlockhd:command not found

No matter how i try to type it (with spaces,without spaces,with the < >,without < > , whatever I get the same message.
I can see the Toshiba MMCS drive in the bios BUT I CAN`T UNLOCK IT !

can anyone see what I`m doing wrong!!!
6 wasted hours sat at computer..Aargh

 

EU should be:
unlockhd -p B2BAB3BCB0DFACBEB1BBBEDFB1ADD2CDC9CEBAB2DFB19E8996DFAA8C9A8DDFDF
US should be:
unlockhd -p B2BAB3BCB0DFACBEB1BBBEDFB1ADD2CDC9CEAAB2DFB19E8996DFAA8C9A8DDFDF

 

Thanks but thats what i`ve put.
Going to try a different computer later.
Waiting for missus to go out before I start taking her laptop apart !