Rear Parking Sensors
#11
RE: Rear Parking Sensors
Your dealer should be able to fit the rear sensors without fuzz. They come standard to luxury versions here in Australia and is an optional accessory for lower spec models. I assume that fitting it to your Outlander wouldn't be a problem because it has basically the same design.
It has its benefits because it gives you an allowance for error especially for backing up.
If you are really keen to have it installed, I would definitely go for OEM insteadof aftermarket. OEM provides an adjustment button for sensors (switch is usually installed beside the ASC button)i.e. you can set sensors sensitivity in case you install tow bar.
Click this site for image.
http://www.mitsubishimotors.com.au/#...er&id=3437
[IMG]local://upfiles/13235/ABF600EAA6014F7AA53D24F2A14D8329.jpg[/IMG]
It has its benefits because it gives you an allowance for error especially for backing up.
If you are really keen to have it installed, I would definitely go for OEM insteadof aftermarket. OEM provides an adjustment button for sensors (switch is usually installed beside the ASC button)i.e. you can set sensors sensitivity in case you install tow bar.
Click this site for image.
http://www.mitsubishimotors.com.au/#...er&id=3437
[IMG]local://upfiles/13235/ABF600EAA6014F7AA53D24F2A14D8329.jpg[/IMG]
#12
RE: Rear Parking Sensors
ORIGINAL: chenarm
It's not on the accessory list in North America, but Idon't thinkthat the wirring in North America is different than the rest of the world.
It's not on the accessory list in North America, but Idon't thinkthat the wirring in North America is different than the rest of the world.
Though there could be some wiring differences for US, and all non-US models. Just because the US doesnt use all the "options" that most of the world does.
One thing, dont all rear-sensor models also have the rear "fog" light? If so, they could be in the same wiring harness, which US models might not have...
#13
RE: Rear Parking Sensors
A couple of problems, looks like I can not order the part from a dealer in North America, And I can't see the connectors for the sensors on the rear bumber wirring harness, so it sounds like I will not be getting it. Even if I could have ordered it, it would probably have been way expensive, based on the price that someone quotedFrom EU.
One thing that I have learned today, as that up until now MMC Canada reported into MMC US. Apparently that has changed a few weeks ago, and now MMC Canada is directly under MMC Japan. That could mean that we will see more differences between what's offered in US vsv Canada.
One thing that I have learned today, as that up until now MMC Canada reported into MMC US. Apparently that has changed a few weeks ago, and now MMC Canada is directly under MMC Japan. That could mean that we will see more differences between what's offered in US vsv Canada.
#14
RE: Rear Parking Sensors
I have fitted a set of these to mine, they are excellect and easy to fit, whole job tok about 45 minutes, removing and replacing the rear Rockford speaker in order to connect to reverse lamp wiring took up most of the time. Dont know if seller will ship over pond but carriage should not be too expensive as the box is not heavy. Seller is ncooksecurity
http://cgi.ebay.co.uk/Easy-Fit-rever...QQcmdZViewItem
http://cgi.ebay.co.uk/Easy-Fit-rever...QQcmdZViewItem
Thread
Thread Starter
Forum
Replies
Last Post
S11 Mitso
Mitsubishi Outlander
5
04-06-2014 09:42 AM